Operating Fluid - EMG ELDRO EdEx Series Assembly Manual

9.2.1

Operating fluid

Table 24: Fill quantities for operating fluid
Short lift type
EdEx 32/50
EdEx 50/50
EdEx 80/60
EdEx 80/75
EdEx 125/60
EdEx 125/75
EdEx 150/60
EdEx 150/75
EdEx 200/60
EdEx 250/60
EdEx 320/100
ELDRO-EdEx-Montageanleitung-607338-EN.docx
WARNING
Cylinder movements
Risk of crushing between surrounding hindrances and the cylinder
or connected components as a result of the cylinder retracting
automatically due to the reset spring with a hydraulic pressure
drop, or if the power supply is interrupted.
– Switching the motor off returns the cylinder to the limit
position.
– Before removing the EdEx thruster, the connected unit such
as the brake must be secured to prevent movements.
EdEx thrusters are delivered from the factory with operating fluid that
depends on the usage conditions and the required version. The type
of operating fluid that the thruster was filled with is specified on the
type plate. EdEx thrusters must be operated exclusively with the
hydraulic medium specified on the type plate.
NOTICE
Observe the safety data sheet issued by the oil manufacturer. The
type of operating fluid already in the thruster must always be used
to top it up.
Fill quantity in litres
2.4
2.4
3.9
3.9
3.9
3.9
3.9
3.9
7.4
7.4
10.8
Long lift type
EdEx 80/160
EdEx 125/160
EdEx 150/160
EdEx 200/160
EdEx 250/160
EdEx 320/160
Maintenance
Maintenance tasks
Fill quantity in litres
6.0
6.0
6.0
11.1
11.1
11.1
9
9.2
63 / 75