Seals - EMG ELDRO EdEx Series Assembly Manual

9.2.4

Seals

ELDRO-EdEx-Montageanleitung-607338-EN.docx
 Check the fill level according to the EdEx type and top up if
required.
Figure 12: Adjustment parts, lifting/lowering/throttle valve
1 Fill level
2 Screw plug
3 Filling opening
4 Regulating screw
Topping up the operating fluid
 Fill the EdEx thruster with operating fluid up to the filling nozzle
bottom edge. Perform several lifting movements while doing so in
order to prevent air entering the system.
 Check the fill level again and top up if required.
 Close the filling screw and, if present, the overflow screw tight
(tightening torque: 65 Nm).
 Return the EdEx thruster to its original installation position
(⇒ Assembly chapter).
The EdEx thruster must be checked for leaks at least 1 x per year.
Maintenance
Maintenance tasks
9
9.2
65 / 75