Installation Location Of The Regulating Screw - EMG ELDRO EdEx Series Assembly Manual

6 Assembly and installation
6.3 Adjusting the valves
6.3.1

Installation location of the regulating screw

54 / 75
The versions with lifting and/or lowering valves enable the lifting rod's
set or reset speed (setting or resetting time) to be adjusted infinitely
within a specific range. The type designation specifies whether an
EdEx thruster is equipped with valves (see type plate; ⇒Type
designation and type key section).
Examples for the version with valves:

Lowering valve (S):

Lifting valve (H):

Throttle valve (D):
Figure 11: Regulating screw lifting/lowering/throttle valve
1 Screw plug (filling opening)
2 Filling opening
3 Regulating screw
EdEx 50/6 S
EdEx 80/6 H
EdEx 121/6 D
ELDRO-EdEx-Montageanleitung-607338-EN.docx