Intended Use - EMG ELDRO EdEx Series Assembly Manual

2 Safety
2.2

Intended use

2.2 Intended use
14 / 75

The specification of the maximum surface temperature is only
valid for dust deposits up to a maximum of 5 mm.

Clean only using a damp cloth (ESD danger)

For dusts of group IIIA/IIIB/IIIC it is necessary to prevent
electrostatic charges on the housing surface, which can lead to
propagating brush discharges, through suitable measures. These
EdEx thrusters must not be exposed to highly charging
processes.

Fixing screws of the end shield must have a yield strength of 640
Nm 2 (quality 8.8).

Additional non-conductive (colour) coatings must not exceed the
total coating thickness for IIA/B by more than 2 mm and for IIC
by more than 0.2 mm.

The use of contrasting colours makes it easier to detect dust
deposits.

When coating, care must be taken to ensure chemical resistance
to the ambient conditions.
The EdEx thruster is partly completed machinery and must be
connected to other parts to form a complete machine. The safety of
this complete machine must prevent hazards caused by controlling
and operating the system.
EdEx thrusters are used to apply straight work movements using
electro-hydraulics. In drive technology, drives are braked or stopped
using brakes with electro-hydraulic actuation thrusters (lifting
thrusters). EdEx thrusters are mainly used in drive technology to
bleed drum and disc brakes (brake bleeder).
ELDRO-EdEx-Montageanleitung-607338-EN.docx