Omega RD8800 User Manual page 83

Chapter 5 Programming
numeric keypad to enter the desired start seconds (00 to 59) and press the ENTER button. The
programmed start time will be displayed. If the start time displayed is correct, press the ENTER
or YES button to proceed to the interval.
After the start time is set, you will be prompted with "intrvl XX:XX:XX". If the displayed interval time is
correct, press the ENTER or YES button to return to the Auto reset setup menu. If the interval time is
not correct, press the NO button. You will be prompted with "intrvl hrs XX ". Use the numeric
keypad to enter the desired interval hours (00 to 23) and press the ENTER button. You will be
prompted with "intrvl mins XX ". Use the numeric keypad to enter the desired interval minutes (00
to 59) and press the ENTER button. You will be prompted with "intrvl secs XX ". Use the numeric
keypad to enter the desired interval seconds (00 to 59) and press the ENTER button. The programmed
interval time will be displayed. If the interval time displayed is correct, press the ENTER or YES button
to return to the Auto reset setup menu. Press the EXIT button to return to the Reset control menu.
NOTE: When programming a Totalize Point, the interval represents the frequency of which the
Totalization value will be reset to zero. The Totalization value will be logged on the Alarm/Event
data log before the value is reset if the Reset print option is enabled.
NOTE: When programming a High peak or Low peak Point, the interval represents the frequency the
High or Low peak value will be reset to the value of the Basepoint. The High or Low peak value will be
logged on the Alarm/Event data log before the value is reset if the Reset print option is enabled.
c. Weekly
To reset a point Weekly:
Use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Weekly and press the ENTER button. Use the
UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to select Monday, Tuesday, Wednesday, Thursday, Friday,
Saturday, or Sunday and press the ENTER button. You will be prompted with "start XX:XX:XX".
If the start time displayed is correct, press the ENTER or YES button to return to the days of the
week. If the start time is not correct, press the NO button. You will be prompted with
"start hrs
the ENTER button. You will be prompted with "start mins
enter the desired start minutes (00 to 59) and press the ENTER button. You will be prompted with
"start secs
press the ENTER button. The programmed start time will be displayed. If the start time displayed
is correct, press the ENTER or YES button to return to the days of the week. Press the EXIT
button twice to return to the Reset control menu.
d. Monthly
To reset a point once a Month:
Use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Monthly and press the ENTER button. You will be
prompted with "rst day
which to reset (00 to 31) and press the ENTER button. You will be prompted with "start XX:XX:XX".
If the start time displayed is correct, press the ENTER or YES button to return to the Auto reset
setup menu. If the start time is not correct, press the NO button. You will be prompted with
"start hrs
the ENTER button. You will be prompted with "start mins
enter the desired start minutes (00 to 59) and press the ENTER button. You will be prompted with
"start secs
press the ENTER button. The programmed start time will be displayed. If the start time displayed
is correct, press the ENTER or YES button to return to the Auto reset setup menu. Press the EXIT
button to return to the Reset control menu.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
XX ". Use the numeric keypad to enter the desired start hours (00 to 23) and press
XX ". Use the numeric keypad to enter the desired start seconds (00 to 59) and
XX . Use the numeric keypad to enter the desired day of the month on
XX ". Use the numeric keypad to enter the desired start hours (00 to 23) and press
XX ". Use the numeric keypad to enter the desired start seconds (00 to 59) and
Page 5-21
XX ". Use the numeric keypad to
XX ". Use the numeric keypad to