Data Interval - Omega RD8800 User Manual

Chapter 5 Programming

5.11.4.3 Data Interval

The Data Interval option allows the user to set the time interval (in minutes) at which Data or Events are
sent to the printer.
To set the Data Interval:
From the Printer out menu use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Data Interval and then press
the ENTER button. You will be prompted with "minutes→XXXX←". Use the keypad to enter the time
interval and press the ENTER button to return to the Printer out menu. A maximum of 1440 minutes (24
hours) may be entered. Setting the Data Interval to 0 will have the unit send Data every 15 seconds.
Events print out as they occur.
5.11.4.4 Characters/Line
The Characters/Line option allows the user to set the number of Characters per Line (40 to 80).
To set the Characters/Line value:
From the Printer out menu use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Characters/Line and then
press the ENTER button. You will be prompted with "characters/line→XX←". Use the keypad to enter the
number of Characters per Line and press the ENTER button to return to the Printer out menu.
NOTE: When printing, the Unit tag and data groupings will not split. Both will wrap around to the next line
together.
5.11.4.5 Data Lines
The Data Lines option allows the user to set the number of Data Lines printed between headers (0 to 255).
To set the Data Lines value:
From the Printer out menu use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Data Lines and then press the
ENTER button. You will be prompted with "data lines→XXX←". Use the keypad to enter the number of Data
Lines to be printed per page and press the ENTER button to return to the Printer out menu. Setting the
Data Line value to 0 will have the unit print the header every time Data or Events are sent to the printer.
Page 5-50
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com