Installation - Omega RD8800 User Manual

Chapter 2 Installation and Wiring

2.2 Installation

The instrument is intended to operate in the following environment:
Indoor Use Only
Installation Category II
Pollution Degree Level II per UL3111-1 / IEC61010-1
Altitude
Temperature
Humidity
AC Mains Supply
NOTE: The recorder is designed to be panel mounted and as such should be considered as permanently
connected. Disconnection from the supply must be possible via a customer supplied switch or circuit
breaker. This disconnection device must be included in the panel installation and should be clearly
marked, in close proximity to the Recorder and easily accessible to the operator.
The Recorder is sized to fit in a standard DIN panel cutout of 5.43" x 5.43" [138 mm x 138 mm] and requires 7.41"
[188.2 mm] behind panel depth not including power and input source cable space needed. Actual dimensions are
shown in Figure 2-1.
WARNING: Do not use this instrument in any manner inconsistent with these operating
instructions or under any conditions that exceed the environmental
specifications stated.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
per IEC 664
up to 2,000 m
-10 °C to 50 °C (5 °C to 40 °C for floppy media) operating
per UL3111-1 / IEC61010-1
Maximum relative humidity 80% for temperatures up to
31 °C decreasing linearly to 50% relative humidity at 40 °C
100 - 240 Vac ~ 50/60 Hz 35 Vac ±10%
Figure 2-1 Recorder Dimensions in Inches [mm]
Page 2-2