Table of Contents
Advertisement
Chapter 5 Programming
5.11.3.3 Save English
The Save English menu option allows the user to save the English Language file to disk/card for editing.
To Save the English Language file to disk/card:
From the Alternate Language menu use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Save English and
then press the ENTER button. The Disk Status Window will show "SAVE LANG" and a window will pop up
when the Language file has been saved to indicate "Language Saved". Press the OK? button to return to
the Alternate Language menu.
5.11.3.4 Save Alternate Language (Alt. Lang.)
The Save Alt. Lang. menu option allows the user to save the Alternate Language file to disk/card.
To Save the Alternate Language file to disk:
From the Alternate Language menu use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Save Alt. Lang. and
then press the ENTER button. The Disk Status Window will show "SAVE LANG" and a window will pop up
when the Language file has been saved to indicate "Language Saved". Press the OK? button to return to
the Alternate Language menu.
5.11.4 Printer out
The Printer out menu option allows the user to configure the Parallel Printer Port to print point data and/or
events at a specific interval.
To set the Printer out options:
From the System menu use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Printer out and then press the ENTER
button. The Printer out menu will be displayed with five options: Data, Events, Data Interval, Characters/
Line and Data Lines. These options are described in the following sections.
5.11.4.1 Data
The Data option allows the user to enable or disable the printing of point data to the printer.
To enable or disable the printing of point data:
From the Printer out menu use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Data and then press the ENTER
button. A window will pop up showing the current status as "print data=NO*" (if the unit will not print data)
or "print data=YES*" (if the unit is to print data). Press the YES button (to enable Data printing) or the NO
button (to disable Data printing). If you select YES, you will be prompted with "point X=YES*" or
"point X=NO*". Use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to select the point you wish to turn on or off and press
the YES button (to turn it on) or the NO button (to turn it off) and automatically advance to the next point.
Then press the ENTER button to return to the Printer out Menu.
5.11.4.2 Events
The Events option allows the user to enable or disable the printing of Events to the printer.
To enable or disable the printing of Events:
From the Printer out menu use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Events and then press the
ENTER button. A window will pop up showing the current status as "print events=NO*" (if the unit will not
print events) or "print events=YES*" (if the unit is to print events). Press the YES button (to enable Event
printing) or the NO button (to disable Event printing). Press the ENTER button to return to the Printer out
Menu.
NOTE: If Data and/or Events are set to "YES" and there is a problem with the printer (i.e. turned off, off line,
etc.), the error message "Printer Problem" will appear. Set Data and/or Events to "NO" to prevent this
error message from displaying until the problem has been fixed.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Page 5-49
Advertisement
Chapters
Table of Contents
