Table of Contents
Advertisement
Chapter 5 Programming
To enter or change a Passcode:
From the System menu use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Passcodes and then press the ENTER
button. The Passcodes menu will be displayed with two options: Function key (to protect the FUNCtion menu)
and Program key (to protect the PROGram and Hidden menus).
Use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to select Function key (to protect the FUNCtion menu) or Program key
(to protect both the PROGram and Hidden menus) and then press the ENTER button. You will be prompted
with a blank Passcode, and if you press the ENTER button at this point you will effectly clear the Passcode for
that key. Entering a passcode of 000000 or all spaces is equivalent to setting NO Passcode. Use the numeric
keypad to enter a Passcode from 1 to 6 characters in length. You will not be asked to verify the Passcode, but
the Passcode will be displayed as you enter it so that you can check it for accuracy. WRITE THE PASSCODE
DOWN AND KEEP IT SOMEPLACE SAFE. Once the Passcode is entered as desired, press the ENTER
button to return to the Passcode menu. Repeat the same process for the other menu option. The Passcodes
for each key may be the same or different, or may be disabled.
Once a passcode is entered, you will be prompted for it the next time you try to enter the respective menu. If
you do not enter it correctly, you will be denied access to the menu.
5.11.3 Alternate (Alt.) Language
The Alternate Language menu option allows the user to select, load and save alternative language files.
To program the Alternate Language options:
From the System menu use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Alt. Language and then press the
ENTER button. The Alternate Language menu will display four options: Select Lang., Load Alt. Lang., Save
English and Save Alt. Lang. These options are described in the following sections.
5.11.3.1 Select Language (Lang.)
The Select Lang. option allows the user to toggle between the English Language and an Alternate Language.
To Select a Language:
From the Alternate Language menu use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Select Lang. and then
press the ENTER button. This will toggle between English and any loaded Alternate Language. If an
Alternate Language is not loaded, the error message "No Other Language" will be displayed. Press the
OK? button to clear the error message.
5.11.3.2 Load Alternate Language (Alt. Lang.)
The Load Alt. Lang. option allows the user to load an Alternate Language from the file.
To Load an existing Language file:
From the Alternate Language menu use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Load Alt. Lang. and
then press the ENTER button. A pop up window will display "load language=NO*". Press the YES button
to change the display to read "load language=YES?" and then press the ENTER button. The unit will look
on the disk/card for any Language files which will be displayed in the File Directory. If more than one
Language file exists, the directory will list them one above the other, with the current file to be loaded
indicated by the arros alongside it. Use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to select desired Language file and
then press the ENTER button. The unit will load the selected Language file from the disk/card.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Page 5-48
Advertisement
Chapters
Table of Contents
