Table of Contents
Advertisement
Chapter 5 Programming
5.4.3.1 Unit tag
The Unit tag is the default display that shows in the Status Line at the top of the display. It may be used
to identify a place or process being monitored by the Recorder. The Unit tag can be any number or alpha
character string of up to 20 characters.
To select Unit tag as the Powerup display:
Use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Unit tag and then press the ENTER button. You will be
provided with an alphanumeric keypad. Use the LEFT (← ← ← ← ← ) or RIGHT ( ) button to move the cursor to the
edit position and then use the alphanumeric keypad to enter the Unit tag you wish to display. The PAGE
button selects the next page of characters, the PAGBK button returns to the previous page of characters,
the SHIFT button toggles between upper and lower case letters, and the SPC button enters a space.
When you are done, press the ENTER button and then the EXIT button to return to the Display menu. You
can press the EXIT button to cancel at any time without changing the current setting.
5.4.3.2 Auto jog
The Auto jog Powerup display jogs (or scrolls) through each programmed point with the point status and
value at the programmed Display rate. The programmed Display rate can be 1 to 60 second intervals,
programmed under PROGram, Displays, Display rate (see Section 5.4.1).
To select Auto jog as the Powerup display:
Use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Auto jog and then press the ENTER button. Press the
EXIT button to return to the Display menu.
5.4.3.3 Point
The Point Powerup display allows a programmed point to be displayed as the default Status Window value
or the unit prompt. The point number programmed, the current value of that point, and the engineering
units will be displayed as the unit Powerup prompt in the Status Line.
To program a programmed point to act as the Powerup display:
Use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Point and then press the ENTER button. You will be
provided with a keypad to select the point you wish to use, 1-9 or A-F. Select the point you want and press
the ENTER button or press the EXIT button to return without changing the point. Press the EXIT button
again to return to the Display menu.
5.4.3.4 Alarms
The Alarms Powerup display will jog (or scroll) through all points in Alarm at the programmed Display rate.
If all points are in Alarm, each point will be displayed at the Display rate in the Status Line. If no points are
in Alarm, the unit Powerup display will show "NO ALARMS".
To select Alarms as the Powerup display:
Use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Alarms and then press the ENTER button. Press the
EXIT button to return to the Display menu.
5.4.3.5 Junction Temp
The Junction Temp Powerup display will display the temperature in Degrees F [°F] (Degrees C [°C] with
European Time format selected) of the cold junction reference compensator in the Status Line.
To select Junction Temp as the Powerup display:
Use the UP (↑ ↑ ↑ ↑ ↑ ) or DOWN (↓ ↓ ↓ ↓ ↓ ) button to highlight Junction Temp and then press the ENTER button. Press
the EXIT button to return to the Display menu.
Page 5-4
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Advertisement
Chapters
Table of Contents
