Omega RD8800 User Manual page 148

Install Relay Option
To install the 3 or 6 Channel Mechanical or Solid State Relay Option into the DIN Standard [144 mm x 144 mm]
Data Recorder:
1. Unplug the recorder.
2. Plug the connector and metal tabs of the Relay option into the recorder case as shown in Figure 2.
3. Install two #4-40 x 1/4 flat head screws as shown below to secure the Relay option.
4. Plug the recorder in. The unit will automatically recognize the addition of the Relay option.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Metal Tabs
Figure 2 Relay Board Installation
Page 2 of 2
Relay connector
on circuit boared
not shown
Relay Connector
Screw Relay option into the
bottom of the recorder.