Lifting The Ceramic Body Onto The Cart; Attaching The Top Damper; Installing The Side Shelf Brackets; Mounting The Side Shelves - Pit Boss PBK24 Assembly And Operation Instructions Manual

3. LIFTING THE CERAMIC BODY ONTO THE CART

Parts Required:
1 x Ceramic Body (#4)
Installation:
• First, remove all of the parts that are inside of the ceramic body to
make lifting easier. Make sure the cart is secure, and all of the bolts
are tight before placing the ceramic body into it. Press down on the
caster levers to lock the castor wheels to ensure the ceramic charcoal
barbecue cannot move.
CAUTION: Use a minimum of two people when lifting the ceramic
body onto the cart. Failure to comply may result in serious injury or
damage to the product.
• To place the ceramic body on the cart, place one of your hands in the
bottom vent of the ceramic body and the other under the grill. Place
the ceramic charcoal barbecue on the cart with the bottom vent facing
to the front of the cart, allowing the vent to open and close without
any interruption.

4. ATTACHING THE TOP DAMPER

Parts Required:
1 x Top Damper Vent (#3)
Installation:
• Align the side notch of the top damper vent with the thermometer on
the front of the ceramic body, and set over the top opening. Secure
with pre-attached screws, washers, and nuts.

5. INSTALLING THE SIDE SHELF BRACKETS

Parts Required:
2 x Left Side Shelf Bracket (#6)
2 x Right Side Shelf Bracket (#7)
Installation:
• Attach the left side shelf brackets to the ceramic body using the pre-
attached screws with their corresponding washers, locking washers,
and nuts on the trim.
• Repeat the same installation for the right side shelf brackets. Tighten
all screws securely once all brackets are installed.

6. MOUNTING THE SIDE SHELVES

Parts Required:
2 x Side Shelf (#8)
Installation:
• Insert the hinges of each side shelf into each of the side shelf brackets
on both sides of the ceramic body.
3
比例 1.000
4
5
6
7
6
8
4
3
7