Installing The Side Shelf Handle; Mounting The Cart To The Grill Body - Pit Boss PB260PSP2 Instructions And Recipes Manual

2. INSTALLING THE SIDE SHELF HANDLE

Parts Required:
1 x Grill Body / Hopper Assembly (#6)
2 x Side Shelf Handle Mounts (#10)
1 x Side Shelf Handle (#11)
4 x Screw (#A)
Installation:
• Note the alignment groove on each side of the Side Shelf Handle. Insert
the Side Shelf Handle into the embossed hole of the inside of each Side
Shelf Handle Mount.
• Next, secure the Side Shelf Handle Mounts to the Side Shelf using four
screws, two in each piece.

3. MOUNTING THE CART TO THE GRILL BODY

Parts Required:
1 x Grill Body / Hopper Assembly (#6)
1 x Cart Assembly (#12)
2 x Screw (#B)
2 x Washer (#C)
2 x Nut (#D)
Installation:
• Lay the Grill Body on the cardboard on its side with the Side Shelf Handle
pointed upward. Place the Cart Assembly next to the Grill Body, on its
side, with the Wheels on the bottom.
• Attached the cart leg to the Grill Body brace by inserting the Screw
(from the outside) and secure using the Washer and Locking Nut. Note
3A. Repeat installation for the other cart leg.
• Once the Cart has been securely mounted to the Grill Body, carefully
turn the grill into an upright position. Note 3B.
8
2
6
10
A
3A
6
D
C
B
3B
10
11
12