Blink Codes For Status Led - Veris Industries E34 Series Installation Manual

E34 Series Installation Guide
Data Outputs (cont.)
Blink Codes for
Status LED
(E34A Models Only)
Z207251-0C Page 10 of 42
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris 'V' logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
10 to 32,767 seconds (over 9 hours). An alternate mode utilizes an RTC set to a specific date and time to synchronize
the results with a larger system. The RTC must first be set in order to run and capture demand values and energy
snapshots. When power is interrupted, the RTC resets to a default date and time and must be set again in order to run.
When using the RTC, the demand/snapshot interval can be set from 10 to 3,600 seconds (1 hour).
Measurements
Current: multi-phase average and per phase
Current phase angle per branch
Real Time Measurements Real power (kW): multi-phase total and per phase
Apparent power (kVA): multi-phase total and per phase
Power factor: multi-phase average and per phase
Current present demand: multi-phase average and per phase
Demand Measurements
Real power (kW) present demand: multi-phase average and per
phase
Maximum instantaneous current: multi-phase average and per phase
Historic Maximums Maximum current demand: multi-phase average and per phase
Maximum real power demand: multi-phase total and per phase
Accumulated Energy Energy (kWh): multi-phase total and per phase
Energy Snapshots Energy (kWh): multi-phase total and per phase
Modbus Alarms
Voltage over/under
Branch current over/under
Alarms
Mains current over/under
Color and Pattern Status Description
Green, once per second Normal operation
Amber, once per second Volts or amps clipping
Amber, twice per second Invalid firmware image
Red, solid or blink Diagnostic event detected
©2020 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com
Other companies' trademarks are hereby acknowledged to belong to their respective owners.
TM
0420