Veris Industries E34 Series Installation Manual page 26

E34 Series Installation Guide
Gateway Configuration
(cont.)
Z207251-0C Page 26 of 42
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris 'V' logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
a. Enter the desired IP address in the N1_IP_Address field (in the format xxx.xxx.xxx.xxx)
b. If necessary, change the Subnet Mask by entering the appropriate new value in the N1_Netmask field
c. If the E34E is connected to an Ethernet gateway, enter its IP address in the Default Gateway field. This is important when the
E34E is used as a BACnet BBMD device.
d. Click the Update IP Settings button. The E34E changes its settings.
e. Click the System Restart button and wait for the E34E to fully initialize. The GUI will connect when the E34E is installed on
a network that matches the settings and the new IP address is entered into a web browser on a PC properly configured for the
network.
Using the GUI to Set the Configuration Parameters for the Communication Protocols
Access the GUI according the instructions in the Accessing the Graphical User Interface (GUI) section.
The home screen on the GUI provides fields for configuration of the E34E. The E34E has four primary modes of operation, each of
which support a different combination of protocols. Each option field has a Submit button to the right. When changing the value
in any field, click Submit to store the new value. The GUI prompts the user to restart the system. If multiple values are changed,
©2020 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com
Other companies' trademarks are hereby acknowledged to belong to their respective owners.
TM
0420