Veris Industries E34 Series Installation Manual page 4

E34 Series Installation Guide
Specifications (cont.)
Z207251-0C Page 4 of 42
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris 'V' logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Agency Approvals
Installation Category
Conducted Emissions
Radiated Emissions
Conducted and Radiated Immunity
* See Configuration section for details.
**The E34 must be installed in an appropriate electrical and fire enclosure per local regulations. If E34 products are used in
installations with circuits higher than the product ratings, the circuits must be kept segregated per UL508A Sec. 17.5. Note: E34
internal circuitry (cables and CTs) are not circuits as defined by UL508A, as they do not extend beyond the E34 itself without further
safety/fire isolation.
*** A Pollution Degree 2 environment must control conductive pollution and the possibility of condensation or high humidity.
Consideration must be given to the enclosure, the correct use of ventilation, thermal properties of the equipment and the
relationship with the environment.
©2020 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com
Other companies' trademarks are hereby acknowledged to belong to their respective owners.
COMPLIANCE INFORMATION
UL508**, IEC/EN61010-1
Cat III, Pollution Degree 2***
E34A Models: FCC part 15 Class B, EN61000-6-3, EN61326-1 Class B
(residential and light industrial)
E34E Models: FCC part 15 Class A, EN6100-6-4, EN61326-1 Class A
EN 61000-6-2 and EN 61326-1
TM
0420