Veris Industries E34 Series Installation Manual page 13

E34 Series Installation Guide
Installation (cont.)
Z207251-0C Page 13 of 42
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris 'V' logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
EQUIPMENT DAMAGE
Do not use CTs with current-mode outputs.
Failure to follow this instruction can result in equipment damage.
Figure 4
X2
X1
X2
X1
Figure 5
E34A
7. Strip 9 mm of insulation from the end of the CT leads. A visual strip length indicator is provided on the CT adapter board to
show how much to strip.
Figure 6
28-Meter CT Adapter Board
©2020 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com
Other companies' trademarks are hereby acknowledged to belong to their respective owners.
NOTICE
E34E
Strip Length
Indicator
Locations
TM
X2
X1
X2
X1
0420