To Connect The Power Supply And Connection Cable For E81, E82, E87 Cars - BMW 65 50 0 418 002 Installation Instructions Manual

12. To connect the power supply and connection cable
for E81, E82, E87 cars
X490
X490
H
© BMW AG, Munich
A17
A12
090 1189 Z
A11
A17
A12
090 1190 Z
A18
A13
X11003
090 1191 Z
F13
L
1
090 1193 Z
01 29 0 420 167
Route branches A11–A20 and branch A1 under the
M-ASK/CCC through the centre tunnel to the passenger
footwell.
Route branches A12 and A17, BR cable, to the earth
post X490.
Screw branches A12 and A17, BR cable, to the earth
post X490.
For E81, E82, E87 cars, there is only a distinction
between the high and low controller A11.
Cars with high controller
(magnetic engagement) only
Tie back cable loop A11 to retrofit cable.
Cars with basic controller
(mechanical engagement) only
Cut cable loop A11, insulate and tie back to retrofit cable.
Cars built before 03/07 only
If PIN 3 on connector X11003 is already occupied,
cut the socket contact off branch A13 and connect
branch A13 to the cable from PIN 3 with miniature
connector H.
!
Connect branch A13 to plug X11003, BL 15-pin socket
casing, PIN 3.
Separate socket contact from branch A18, RT/BL cable,
and using miniature connector H to branch A13.
Fit the fuse holder (1).
If there is no fusible link or a fusible link with less than
7.5 A in slot F13, fusible link L must be inserted.
!
12/2007 (Z/Z) 19