BMW 65 50 0 418 002 Installation Instructions Manual page 40

21. Retrofit cable circuit diagram
For cars built after 03/07 without SA866 (China language version), SA867 (Korea language version)
or LA807 (Japan national version) except E81, E82, E87 and cars with CHAMP, the grey cable must
be disconnected, insulated and tied back from PIN 1 on branch A1, SW 32-pin socket casing.
For cars with CHAMP the grey cable must be disconnected from PIN 12 and connected to PIN 25 at branch A15,
26-pin BL socket casing.
Legend
Socket casing 32-pin SW
A1*
Plug casing 3-pin SW
A2*
Socket contact
A3*
Socket contact
A4*
Socket contact
A5*
Socket casing 4-pin SW
A6*
Plug casing 4-pin SW
A7*
Plug 8-pin SW
A8*
Plug 8-pin SW
A9*
Plug casing 18-pin SW
A10*
Cable loop
A11*
Ring eyelet, 6 mm
A12*
Socket contact
A13*
Fuse holder
A14*
Socket casing 26-pin BL
A15*
Plug casing 18-pin SW
A16*
Ring eyelet, 6 mm
A17*
Socket contact
A18*
Fuse holder
A19*
Socket casing 3-pin SW
A20*
ACM Unit
C*
Universal CAN Interface
D*
Socket casing 3-pin SW
E*
Plug X10387
1*
Controller
2*
Socket casing 12-pin SW
X13813
All the designations marked with an asterisk (*) apply only to these installation instructions or this circuit diagram.
© BMW AG, Munich 01 29 0 420 167 12/2007 (Z/Z) 40