BMW 65 50 0 418 002 Installation Instructions Manual page 23

13. To connect the power supply and connection cable
for E90, E91, E92, E93 cars only
L
1
2
1
B1
B2
2
B
B1
© BMW AG, Munich
F34/F19
081 0010 Z
B
3
090 1095 Z
1
090 1038 Z
1
3
090 1096 Z
01 29 0 420 167
Fit the fuse holder (1).
If in slot F34 for cars built from 03/07 to 09/07 and in
slot F19 for cars built after 09/07 there is no fusible link or
a fusible link with less than 7.5 A, fusible link L must be
inserted.
Cars with M-ASK only
Disconnect the existing signal cable (1) from the M-ASK (3).
Route the plug (2) on the existing signal cable (1) to the
ACM unit.
Route branch B1 (10-pin VI connector) on the connection
cable B to the installation site of the ACM unit.
Connect branch B2 (WS 10-pin plug) to the M-ASK (1).
Cars with CCC only
Disconnect the existing signal cable (1) from the CCC (3).
Route the plug (2) on the existing signal cable (1) to the
ACM unit.
Route branch B1 (10-pin VI connector) on the connection
cable B to the installation site of the ACM unit.
12/2007 (Z/Z) 23