BMW 65 50 0 418 002 Installation Instructions Manual page 16

11. To install and connect the retrofit cable
A
X13812
A2
A3-A5
X13812
K
P1
A2
A
A3-A5
© BMW AG, Munich
A10
071 0013 Z
X13813
E
1
060 1086 Z
X13813
A3-A5
060 1087 Z
P
O1
O
E
090 1237 Z
01 29 0 420 167
Route all branches except branch A10 of the retrofit
cable A along the standard wiring harness into the
footwell on the front passenge side.
Cars with AUX jack and without SA 6FL only
Route branches A2–A5 to radio connector X13812.
Disconnect AUX cable (1) from plug X13813, SW
12-pin, and connect to SW 3-pin socket casing E with
following PIN assignments.
- WS/BL, WS/RT, BL or SW cable from PIN 2, to PIN 1
- WS/BR or TR cable from PIN 8, to PIN 3
- WS/RT, WS/GN, WS or GE cable from PIN 7, to PIN 2
Connect socket casing E to branch A2, SW 3-pin plug
casing.
All cars without SA 6FL
If no X13813 plug is available, connect branches
A3–A5 in the same way to socket casing K.
Route branches A3–A5 to radio connector X13812
and connect X13813 plug as follows:
- Branch A3, SW cable, to PIN 2
- Branch A4, GE cable, to PIN 7
- Branch A5, WS cable, to PIN 8
Lock plug X13813 shut and insert into plug X13812.
Cars with SA 6FL only
Connect branches A3–A5 of the retrofit cable A
as follows to socket casing E, 3-pin, SW:
- Branch A3, SW cable, to PIN 1
- Branch A4, GE cable, to PIN 2
- Branch A5, WS cable, to PIN 3
with socket casing E on branch O1 of auxiliary cable O
Connect branch A2, plug casing 3-pin SW, to branch P1
of auxiliary cable P.
12/2007 (Z/Z)
!
16