Table of Contents
Advertisement
Parts and Accessories.
Installation Instructions.
Universal charger/hands-free kit upgrade
BMW 3 Series Saloon (E 90)
These installation instructions are only valid for cars with SA 640 (telephone preparation) and
SA 606 (Business navigation system) or SA 609 (Professional navigation system) or SA 663
(BMW Professional radio).
Upgrade kit No.
Installation time
The installation time is 2.0 hours, but this may vary depending on the condition of the car and the
equipment in it.
Important information
These installation instructions are primarily designed for use within the BMW dealership organisation
and by authorised BMW service companies.
In any event the target group for these installation instructions is specialist personnel trained on BMW
cars with the appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals
and work instructions in a rational order using the prescribed tools (special tools) and observing current
health and safety regulations.
To avoid unnecessary extra work and/or costs, if any installation or function problems occur,
after a brief troubleshooting session (approx. 0.5 hours), an inquiry is to be sent straight away to
the technical parts support via the Aftersales Assistance Portal (ASAP), quoting the chassis
number, the part number of the upgrade kit and a precise description of the problem.
Do not archive the hard copy of these installation instructions since daily updates are made by ASAP.
See ASAP for details of the pictograms.
Pictograms
Denotes instructions that draw your attention to special features.
denotes the end of the instruction or other text.
Subject to technical modifications.
Before you install the upgrade system, test the control module status with the CIP (coding, customising,
programming) test program. If the test detects incorrect statuses in one or more control modules, these
must be updated first using the "Load software" function.
© BMW AG, München
84 64 0 398 229
01 29 0 401 237
02.2005 (Z/Z)
1
Advertisement
Table of Contents
Related Manuals for BMW 84 64 0 398 229
Summary of Contents for BMW 84 64 0 398 229
-
Page 1: Installation Instructions
These installation instructions are primarily designed for use within the BMW dealership organisation and by authorised BMW service companies. In any event the target group for these installation instructions is specialist personnel trained on BMW cars with the appropriate specialist knowledge. - Page 2 Ensure that the cables/lines are not kinked or damaged as you install them in the car. The costs incurred as a result of this will not be reimbursed by BMW AG. Additional cables/lines that you install must be secured with cable ties.
-
Page 3: Table Of Contents
11. To register the mobile phone in the car (cars with SA 663 only) ......14 01 29 0 401 237 © BMW AG, München 02.2005 (Z/Z) -
Page 4: Parts List
Universal charger/hands-free electronic control module (ULF) ULF holder Speed nut (4x) Hexagonal nut (4x) Cable ties (10x) Cable tie holder (2x) Eject box Telephone trim Rear axle differential heat insulation 01 29 0 401 237 © BMW AG, München 02.2005 (Z/Z) -
Page 5: Preparations
The following components must be removed first of all Boot floor trim 51 47 101 Backrest side section on the left 52 26 008 Pedal trim 51 45 185 Roof function centre 01 29 0 401 237 © BMW AG, München 02.2005 (Z/Z) -
Page 6: Installation Diagram
Installation diagram 090 0146 Z Legend Bluetooth aerial Hands-free microphone Universal charger/hands-free electronic control module (ULF) Eject box Main distributor station X14255 and distributor station preparation X14280 01 29 0 401 237 © BMW AG, München 02.2005 (Z/Z) -
Page 7: To Connect The Fibre Optic Cables
1 2 3 4 5 X14255 Place the caps on the distributor stations and secure the distributor stations to the car. 1 2 3 4 5 087 0084 Z 01 29 0 401 237 © BMW AG, München 02.2005 (Z/Z) -
Page 8: To Install And Connect The Universal Charger/Electronic Hands-Free Control Module
ULF control module C. X14081 087 0086 Z Secure the cable from plug X14081 to the side of the ULF holder D using a cable tie holder H. X14081 087 0093 Z 01 29 0 401 237 © BMW AG, München 02.2005 (Z/Z) -
Page 9: To Install And Connect The Bluetooth Aerial And Hands-Free Microphone
Clip the hands-free microphone B into the roof function centre (1) and connect the tied back plug X3564 to the hands-free microphone B. 087 0087 Z 01 29 0 401 237 © BMW AG, München 02.2005 (Z/Z) -
Page 10: To Install And Connect The Eject Box
X13322 on the plug (2) for the eject box. Clip the plug connectors into the plug connector holder (3). Slide the plug connector holder (3) into the X13322 centre console. X4545 090 0215 Z 01 29 0 401 237 © BMW AG, München 02.2005 (Z/Z) -
Page 11: To Install The Rear Axle Differential Heat Insulation
For greater clarity, the illustration does not show the rear axle differential. Push the rear axle differential heat insulation K on to the stud bolt and secure it with speed nuts E. 090 0219 Z 01 29 0 401 237 © BMW AG, München 02.2005 (Z/Z) -
Page 12: Concluding Work And Coding
- Register the handset (see section 10 or 11) - Re-assemble the car The circuit diagram for the telephone preparation (SA 640) is available in DISPlus or GT-1 if required. 01 29 0 401 237 © BMW AG, München 02.2005 (Z/Z) -
Page 13: To Register The Mobile Phone In The Car (Cars With Sa 606 Or Sa 609 Only)
- Switch off the ignition for at least 30 seconds - Quit the mobile phone sub-menu again If the registration process was not completed successfully, repeat the entire process quickly. 01 29 0 401 237 © BMW AG, München 02.2005 (Z/Z) -
Page 14: To Register The Mobile Phone In The Car (Cars With Sa 663 Only)
- Switch off the ignition for at least 30 seconds – the registration/pairing process is complete If the registration process was not completed successfully, repeat the entire process quickly. 01 29 0 401 237 © BMW AG, München 02.2005 (Z/Z)