18. Fitting ACM Unit and Universal Can Interface for E60, E61, E63, E64 cars
A20
A1
A1
D
F
© BMW AG, Munich
A16
060 1246 Z
1
060 1247 Z
01 29 0 420 167
Cars
- built after 03/07 without SA866 (China
language version) SA867 (Korea language
version) or LA807 (Japan national version) only
- with CHAMP
On branch A1, disconnect SW socket casing 32-pin,
grey cable from PIN 1, insulate and tie back.
All cars
In countries in which the picture playback is
permitted up to a certain speed, the red cable from
PIN 2 to branch A1 must be disconnected,
insulated and tied back.
Ensure that the steering column can still move
freely as required.
!
Tie back branch A16, SW 18-pin plug casing, branch A20,
SW 3-pin socket casing and possible excess cable lengths
to the standard wiring harness.
Secure the Universal Can Interface D to the trim (1) below
the steering column using cable ties F.
Connect branch A1 (SW 32-pin socket casing) to Uni-
versal Can Interface D.
12/2007
(Z/Z)
34