BMW 65 50 0 418 002 Installation Instructions Manual page 20

12. To connect the power supply and connection cable
for E81, E82, E87 cars
A13
H
X11002
L
1
1
1
© BMW AG, Munich
A18
090 1192 Z
F34/F19
081 0010 Z
B
B1
3
087 0733 Z
B2
2
090 1039 Z
01 29 0 420 167
Cars built after 03/07 only
If PIN 9 on connector X11002 is already occupied,
cut the socket contact off branch A13 and connect
branch A13 to the cable from PIN 9 with miniature
connector H.
Connect branch A13, RT cable, to connector X11002,
green 15-pin socket casing, PIN 9.
Separate socket contact from branch A18, RT/BL cable,
and using miniature connector H to branch A13.
Fit the fuse holder (1).
If in slot F34 for cars built from 03/07 to 09/07 and in
slot F19 for cars built after 09/07 there is no fusible link or
a fusible link with less than 7.5 A, fusible link L must be
inserted.
Cars with CCC only
2
Disconnect the existing signal cable (1) from the CCC (3).
Route the plug (2) on the existing signal cable (1) to the
ACM unit.
Route branch B1 (10-pin VI connector) on the connection
cable B to the installation site of the ACM unit.
Remove coding (1) from branch B2 (WS 10-pin plug).
Connect branch B2 to the CCC (2) as shown.
!
12/2007 (Z/Z) 20