BMW 65 50 0 418 002 Installation Instructions Manual page 26

14. To connect the power supply and connection cable
for E60, E61, E63, E64 cars
1
1
3
1
B2
B1
© BMW AG, Munich
79
060 1245 Z
2
4
060 0747 Z
B
060 1090 Z
01 29 0 420 167
Cars built after 09/05 only
If a fusible element of less than 7.5 A is present in slot 79
of the fuse holder (1) in the luggage compartment, fusible
link J must be inserted.
All cars
Disconnect the existing signal cable (4) from the control
display (1).
Remove the sheath (2) from the existing signal cable (4)
as far as possible.
Route the plug (3) on the existing signal cable (4) into
the footwell on the driver's side.
Connect branch B1 (10-pin VI plug) of connection cable B
on the control display (1).
Route branch B2 (WS 10-pin plug) to the footwell on the
driver's side.
12/2007 (Z/Z) 26