19. Fitting ACM Unit and Universal Can Interface for E70, E71 cars
A1
A1
D
F
© BMW AG, Munich
A16
A20
070 0352 Z
1
C
070 0353 Z
01 29 0 420 167
Cars
- built after 03/07 without SA866 (China
language version) SA867 (Korea language
version) or LA807 (Japan national version) only
- with CHAMP
On branch A1, disconnect SW socket casing 32-pin,
grey cable from PIN 1, insulate and tie back.
All cars
In countries in which the picture playback is
permitted up to a certain speed, the red cable from
PIN 2 to branch A1 must be disconnected,
insulated and tied back.
Ensure that the steering column can still move
freely as required.
!
Tie back branch A16, SW 18-pin plug casing, branch
A20, SW 3-pin socket casing and possible excess cable
lengths to the standard wiring harness.
Attach Universal Can Interface D to the instrument
panel (1) in front of the ACM unit C using cable ties F.
Connect branch A1, SW 32-pin socket casing, to Uni-
versal Can Interface D.
12/2007
(Z/Z)
36