VERITAS 5150 Manual page 2

Caution: You must complete a power supply swap within three minutes. Leaving the power supply
slot open for longer than three minutes can result in the appliance overheating and cause other
components to fail.
Requirements
Verify that you have the following items:
• Replacement power supply
• ESD wrist strap
Locating the appliance with the faulty component
Use the following steps to locate the appliance with the faulty component.
To locate the appliance with the faulty component
• Verify the appliance serial number. The serial number is located on the rear panel of the appliance
and begins with the letters VTAS.
You can also find the serial number in the pull out tab on the front of the appliance.
QRB # 298: Replacing a power supply
2