Inside Ladder; Tools Needed; Parts Needed - Confer Plastics ROLL-GUARD 7200 Assembly And Installation Manual

A-frame ladder for rigid-framed pools only

Hide thumbs Also See for ROLL-GUARD 7200:

Table of Contents

STEP 1:

INSIDE LADDER

#1: Lay "IL" rail on flat surface.

#3-5: Install 3 more treads, for a total of 4, see above pictures.

#6: Lay "IR" rail on flat surface.

Incorrect, do not

block track.

#7: Lift/rotate and align tread tabs

to fit into rail openings..

#9: Do Not

Install bottom tread

until Step 4!

rubber mallet

1- Inside left rail (marked "IL" at the top)

1- Inside right rail (marked "IR" at the top)

4- Ladder treads

#2: Correct, tap down

until seated, note track is

not blocked..

#8: Tap all 4 treads down

until seated..

Table of Contents