A-frame ladder. adjusts to fit pools 48 inch to 54 inch. ladder must be attached to pool frame - do not use with inflatable pools. swing up section of ladder must be installed on outside of pool weight limit 300 lbs. (6 pages)
Page 1
ASSEMBLY, INSTALLATION and USE MANUAL Assembly video available online: www.conferplastics.com WEIGHT LIMIT 400 LBS. TWO UNITS WITH GATE SINGLE UNIT Model PES-DBLX Model PES-1X MADE IN THE USA 97 Witmer Road North Tonawanda, New York 14120-2421 Toll Free U.S. 800-635-3213 • FAX 716-694-3100 www.conferladders.com...
• Make sure that safety labels are installed and legible. Assembly Instructions CONFER PLASTICS, INC. POOL ENTRY SYSTEM FOR ABOVE-GROUND POOLS Adjusts to fit most above-ground pools with flat or slightly dished bottoms Bill of Materials...
Page 3
Step 1. FOR DECK ATTACHMENT, MEASURE FROM HERE. 1. Measure the Depth of Your Pool. A) For Deck Level Pool Entry (one (1) unit MEASURE FROM HERE FOR 2 UNITS ATTACHED attached to a deck), measure from the top (GROUND LEVEL ENTRY). of the deck to the bottom of the pool approxi- TO ACCOUNT FOR THE POOL mately eight (8) inches out from the pool wall...
Page 4
Step 7. Step 6. Push down firmly Secure each step by tapping a locking wedge (saved from Step 2) between the side panel and the top surface of the step protrusions. Push the second side panel firmly down on the step protrusions.
Page 5
Step 12. Step 13. Note: Two people are required for this operation Water fill WARNING! Pool step will openings on be heavy. Have additional help. Do not attempt to both side place the step by yourself. panels. To prevent algae, add a cup of household bleach...
Watch children at all times when they are in or around water to help prevent drowning. CONFER PLASTICS INC. FIVE YEAR WARRANTY Confer Plastics Inc. warrants their swimming pool ladders and steps to be free from defects in workmanship for five years from date of purchase.