Figure 32. Opening The Workspace File; Figure 33. Downloading And Debugging The Firmware - ST STM32F103ZE User Manual

Starting the PFC application UM0877
With the IAR "embedded workbench IDE" open the workspace file
STM32_DIGITAL_PFC\EWARM\STM32_DIGITAL_PFC.eww .

Figure 32. Opening the workspace file

Download the code into the STM32 as shown.

Figure 33. Downloading and debugging the firmware

As soon as the download is complete you can unplug the J-LINK probe. Once you have
reset the STM32, the control board will be ready for you to try out the demonstrator.
42/62 Doc ID 16854 Rev 1
www.BDTIC.com/ST