3.4 Posizionamento etichette
1.
Targhetta di identificazione (capitolo 2.5)
2.
Etichetta "Avvertenze generali"
3.
Etichetta "Pericolo di schiacciamento"
Evitare di togliere o rendere illeggibili le etichette di
sicurezza o istruzione. Sostituire qualsiasi etichetta che non sia
più leggibile o sia venuta a mancare richiedendola al costruttore.
COROB India Pvt. Ltd. - Mumbai
c/o Daman Factory:
Plot No. 10-13&13A,
Daman Industrial Estate,
Somnath Road - Daman - India
MODEL
YEAR
S/N
1
It is strictly forbidden to use the
machine without protections or with
the safety devices disabled, broken
down, or removed. The panels must
COROB India Pvt. Ltd. - Mumbai
be kept closed at all times.
c/o Daman Factory:
È vietato utilizzare la macchina senza protezioni, i
Daman Industrial Estate,
Plot No. 10-13&13A,
dispositivi di sicurezza disattivati, in avaria o mancanti. I
Somnath Road - Daman - India
pannelli devono essere mantenuti rigorosamente chiusi.
Está prohibido utilizar la máquina sin protección, con los
dispositivos de seguridad desconectados, averiados o no
presentes. Los paneles deben mantenerse rigurosamente
MODEL
FIRST1-TX
5G
cerrados.
Il est défendu d'utiliser la machine sans protections avec
les dispositifs de sécurité désactivés, défaillants ou
manquants. Les panneaux doivent être maintenus
YEAR
strictement fermés.
To prevent any risk of
electrical shock or
injuries, use the
machine indoors only.
S/N
Per evitare il rischio di
scosse elettriche o
ferite, utilizzare la macchina solo in ambienti interni.
Para evitar el riesgo de descargas eléctricas o heridas,
utilizar la máquina sólo en espacios interiores.
Pour éviter tout risque d'électrocution ou blessures, utiliser
la machine seulement dans des environnements intérieurs.
Unplug the power supply cable before carrying out any
maintenance operations.
Scollegare il cavo di alimentazione prima di effettuare
COMMESSA
CODICE MACCHINA
qualsiasi operazione di manutenzione.
Desconectar el cable de alimentación antes de efectuar
cualquier operación de mantenimiento.
Débrancher le câble d'alimentation avant d'effectuer toute
opération d'entretien.
FIRST1-TX
5G
3.4 Position of labels
1.
Identification plate (chapter 2.5)
2.
Label "General warnings"
3.
Label "Risk of crushing"
Do not remove or make illegible the safety or instruction
labels. Replace any label which has become illegible or is
missing, by requesting it to the manufacturer.
It is strictly forbidden to use the
machine without protections or with
the safety devices disabled, broken
down, or removed. The panels must
be kept closed at all times.
È vietato utilizzare la macchina senza protezioni, i
dispositivi di sicurezza disattivati, in avaria o mancanti. I
pannelli devono essere mantenuti rigorosamente chiusi.
Está prohibido utilizar la máquina sin protección, con los
dispositivos de seguridad desconectados, averiados o no
presentes. Los paneles deben mantenerse rigurosamente
cerrados.
Il est défendu d'utiliser la machine sans protections avec
les dispositifs de sécurité désactivés, défaillants ou
manquants. Les panneaux doivent être maintenus
strictement fermés.
To prevent any risk of
Unplug the power
electrical shock or
supply cable before
injuries, use the
carrying out any
machine indoors only.
maintenance operations.
Per evitare il rischio di
Scollegare il cavo di
scosse elettriche o ferite,
alimentazione prima di
utilizzare la macchina solo
effettuare qualsiasi
in ambienti interni.
operazione di
manutenzione.
Para evitar el riesgo de
descargas eléctricas o
Desconectar el cable de
heridas, utilizar la
alimentación antes de
máquina sólo en espacios
efectuar cualquier
interiores.
operación de
mantenimiento.
Pour éviter tout risque
d'électrocution ou
Débrancher le câble
2
blessures, utiliser la
d'alimentation avant
machine seulement dans
d'effectuer toute opération
des environnements
d'entretien.
intérieurs.
3
- 13 -
COROB India Pvt. Ltd. - Mumbai
c/o Daman Factory:
Plot No. 10-13&13A,
Daman Industrial Estate,
Somnath Road - Daman - India
FIRST1-TX
5G
MODEL
YEAR
S/N
1
COMMESSA
CODICE MACCHINA
COROB FIRST1-TX
Need help?
Do you have a question about the FIRST1-TX and is the answer not in the manual?