Operating The Appliance - Beko BK 20 HPLCD Manual

Table of Contents

Advertisement

Available languages

Available languages

5

Operating the Appliance

Please follow the steps below to operate the ap-
pliance correctly.
1. Provide power supply.
2. Open the gas valve.
5.2.1 Winter Position (Central
heating (K3) +utility water)
1. Press ON/OFF button (K3). Radiator and tap
symbols will appear on the display.
2. When utility water is not needed, the central
heating circuit output water temperature will
appear on the display. Press (K1) to increase the
central heating temperature and press (K2) to
decrease it. After pressing these buttons, the
set temperature will appear on the display. A
flame symbol will be displayed once the combi
boiler has been activated. When it is in the
central heating mode, the radiator symbol on
the display will flash.
3. Press (K7) to increase the utility water
temperature and press (K6) to decrease it.
Once you have pressed these buttons, the set
utility water temperature will be displayed.
When utility water is needed, the product will
switch to the utility water mode and the tap
symbol will flash on the display. Even if the
product is operating in the central heating
mode due to the utility water priority, it will
switch to the utility water mode when utility
water is needed.
K7
88.8
K6
re s e t
K5
Combi Boiler / User Manual
K1
K2
K4
K3
5.2.2 Summer Position (utility
water only)
1. Press ON/OFF (K3) until the tap symbol appears
on the display.
2. Press (K7) to increase the utility water
temperature and press (K6) to decrease it.
Once you have pressed these buttons, the set
utility water temperature will be displayed.
When utility water is needed, the combi boiler
will operate in utility water mode.
31 / EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bk 26 hplcd

Table of Contents