Rack Console - Fujitsu BS2000 SE Series Basic Operating Manual

5.1 Rack console

The rack console contains the following in a compact 19'' slide-in housing (1 HU):
A fold-out 17'' TFT color LCD monitor with a control panel and screen menu
A keyboard with US/international assignment with an integrated number pad
A touchpad with a scroll bar
Left and right mouse buttons
Monitor, keyboard and touchpad are protected in the slide-in module.
The rack console serves as the local console:
Entries from the rack console are normally transferred to the Management Unit.
Outputs to the rack console normally come from the Management Unit, depending on the setting of the console
switch, see section "Console switch"
After you have logged in on the local console, you can call the SE Manager via the local desktop's browser.
Safety instructions
Pull the rack console slowly toward you until the slide rails lock. If the slide rails are not locked, the rack console
can move unexpectedly. Be careful not to catch your fingers when you pull or push on the slide module or when
you open or close the LCD, etc.
Do not apply any strong force to the rack console when it is pulled out or when the monitor is opened and being
used.
Do not press strongly on the monitor's screen, scratch it with sharp objects, or bring magnetic objects near it.
Doing so can damage the monitor.
Note that the corners of the open device can be dangerous if bumped into. Always be careful when the device is
open.
We recommend that you store the rack console in the rack when not in use.
Sliding the rack console out of the rack
> Loosen the finger screws (1)
> Pull the rack console while you hold the handle (2) until it locks into place.
.
39