Fujitsu BS2000 SE Series Basic Operating Manual page 45

Troubleshooting
No image is displayed on the monitor:
Symptom
The power LED is out.
The power LED is orange. Or,
when the MENU/SELECT button is
pressed,
the message "Signal Going to Sleep" is
displayed.
The power LED lights but no image
is displayed on the monitor.
The screen flickers.
The monitor display looks strange:
Symptom
Grid screen that flickers.
Vertical stripes are visible.
Sometimes no images are
displayed on the monitor.
Letter weights are different across
the monitor.
Monitor cannot be adjusted:
Symptom
Automatic adjustment using the
AUTO/EXIT button does
not work and the following message
Cause
The power is not turned on.
The monitor does not
function
correctly after being turned
on.
The server is in standby
mode.
The monitor is incorrectly
connected to the server.
The rack console was turned
on after the server was
turned on.
The monitor is incorrectly
connected to the server.
The monitor is incorrectly
connected to the server.
Cause
The monitor is unfocused.
Monitor adjustment is not
correct.
The monitor is incorrectly
connected to the server.
Focus or clock adjustment is
not correct.
Cause
Action
Press the power button.
Notify Customer Support.
Notify Customer Support.
Turn on the device at the same
time as or before you turn on the
server.
Notify Customer Support.
Notify Customer Support.
Action
Adjust the focus of the monitor.
Adjust the clock, and then
adjust the display position.
Notify Customer Support.
Adjust the clock, and then
adjust the display position.
Action
45