Controls - Fujitsu BS2000 SE Series Basic Operating Manual

6.1.1 Controls

ID Identification (ID) button
Lights up (blue) on the front and on the rear of the MU when the ID button is pressed. The two ID
indicators are synchronized.
On/Off button
When the MU is switched off, it is switched on again by pressing the On/Off button once.
When the MU is in operation, it is switched off by pressing the On/Off button once.
!
CAUTION!
Possible loss of data!
i
The On/Off switch does not disconnect the server from the voltage grid. To disconnect from
the mains completely, remove the power plugs.
RST or Reset button
RESET
Pressing the Reset button reboots the MU.
!
CAUTION!
Possible loss of data!
NMI NMI button
!
CAUTION!
Do not press! Possible loss of data! The NMI button may only be used by Customer
Support.
59