Fujitsu BS2000 SE Series Basic Operating Manual page 42

HOT-KEY and RESET key
The following indicators and buttons are located on the right above the keyboard.
HOT-KEY Pressing the HOT-KEY (outputs the code of the CTRL key twice) causes the menu of the connected
console switch to be called.
RESET Resets the keyboard and pointing device on this device.
Pointing device operations
When you operate the pointing device, touch or tap lightly on the touchpad surface.
Moving the pointer
Slide your finger lightly on the touchpad surface in the direction you want to move the cursor.
Single clicking
Lightly tap the touchpad surface once, or click the left button once.
Double clicking
Lightly tap the touchpad surface twice, or click the left button twice.
Dragging
Lightly tap the touchpad surface twice and without releasing your finger from the touchpad surface, slide your
finger to move the cursor to the desired position, and then release your finger from the surface. Or, while
holding down the left button, slide your finger to move the cursor to the desired position, and then release your
finger from the touchpad surface.
42