Controls; Rack Console - Fujitsu SE500 Basic Operating Manual

5 Controls

5.1 Rack console

The rack console contains the following in a compact 19'' slide-in housing (1 HU):
A fold-out 17'' TFT color LCD monitor with a control panel and screen menu
●
A keyboard with US/international assignment with an integrated number pad
●
A touchpad with a scroll bar
●
Left and right mouse buttons
●
Monitor, keyboard and touchpad are protected in the slide-in module.
The rack console serves as the local console:
Entries from the rack console are normally transferred to the Management Unit.
●
Outputs to the rack console normally come from the Management Unit, depending on
the setting of the console switch, see
After you have logged in on the local console, you can call the SE Manager via the local
●
desktop's browser.
Safety instructions
Pull the rack console slowly toward you until the slide rails lock. If the slide rails are not
●
locked, the rack console can move unexpectedly. Be careful not to catch your fingers
when you pull or push on the slide module or when you open or close the LCD, etc.
Do not apply any strong force to the rack console when it is pulled out or when the
●
monitor is opened and being used.
Do not press strongly on the monitor's screen, scratch it with sharp objects, or bring
●
magnetic objects near it. Doing so can damage the monitor.
Note that the corners of the open device can be dangerous if bumped into. Always be
●
careful when the device is open.
We recommend that you store the rack console in the rack when not in use.
●
U41858-J-Z126-2-76
section "Console switch" on page 43.
33