BART LABDMM2 User Manual page 31

LABDMM2
The identification takes place with the product name and manufacturer on the front panel of the instrument.
The nominal flow rate and the serial number is marked at the LASER on the switch body. Sticker on the back
shows the technical characteristics, the CE mark and the symbol of the disposal, and installed options.
Environments with explosive atmosphere.
Environments with inflammable or corrosive gas.
The instrument is a professional apparatus compliant to the Directives 2011/65/UE (RoHS) and
2012/19/CE (RAEE/WEEE), then it must be disposed separately as electric and electronic waste.
In different countries of European Community, it must be disposed as waste electric and electronic
in accord to the laws of the country where the device is commercialized.
Before to remove the instrument, you disconnect first the power supply and after the cables.
The manometer does not contain batteries
The components are electronic.
In the case of transport packaging to the instrument.
Beware of strong shocks and moisture.
We recommend using the briefcase that can be purchased separately, see chapter accessories.
USER GUIDE
2. IDENTIFICATION
3. USES NON PERMIITED
4. DISPOSAL
5. TRANSPORT
Pag. 3
MO.LABDMM2.560.ENG.R1