Installing A Bim - Huawei PowerCube 5000 Installation Manual

PowerCube 5000 (SUN2000-150KTL-S0)
Installation Guide
Switch off the battery circuit breaker before installing a BIM.


Scenario 1 (Installing on the Battery Top)
Step 1 (Optional) Remove the insulation cover from a battery.
Step 2 Connect the negative and positive cables of the BIM to the negative and positive terminals of
the battery respectively.
Issue 03 (2020-04-10)
Before attaching the BIM fastener, ensure that the installation surface is smooth and
dustless.
If the BIM will not be used for a long period, disconnect the BIM cables or remove the
BIM to avoid power consumption which can affect the battery life.
The battery appearance is for reference only.
Copyright © Huawei Technologies Co., Ltd.
6

Installing a BIM

6 Installing a BIM
43