Installing Pv Input Power Cables - Huawei PowerCube 5000 Installation Manual

PowerCube 5000 (SUN2000-150KTL-S0)
Installation Guide
iBOX
iBOX 16
----End

7.6 Installing PV Input Power Cables

Prerequisites
Switch off all circuit breakers before installing power cables.
Procedure
Step 1 Connect DC input power cables between the solar junction box (SJB) and the cabinet.
1.
2.
3.
4.
Figure 7-18 Installing PV input power cables
Issue 03 (2020-04-10)
ADDR1
ON
Prepare a cable of suitable length as required and install a cord end terminal or an OT
terminal on both ends of the cable.
Secure one end of the negative DC input power cable to the PV- screw in the cabinet.
Secure one end of the positive DC input power cable to the PV+ screw in the cabinet.
Secure the other end of the DC input power cables to the output terminal in the SJB.
One PV input is used as an example.
Copyright © Huawei Technologies Co., Ltd.
ADDR2 ADDR3
ON ON
7 Installing Cables
ADDR4 Address
ON 75
60