Logging In To The Webui - Huawei PowerCube 5000 Installation Manual

PowerCube 5000 (SUN2000-150KTL-S0)
Installation Guide
Step 2 Set the IP address, subnet mask, and gateway address on the LCD.
Table 9-12 IP parameters
Main
Menu
Setting
Wizard
----End

9.4.3 Logging In to the WebUI

Procedure
Step 1 Set the PC IP address in the same network segment as the SMU IP address.
For example, if the SMU has an IP address of 192.168.0.10, a subnet mask of 255.255.255.0,
and a default gateway of 192.168.0.1, set the IP address to 192.168.0.11, subnet mask to
255.255.255.0, and default gateway to 192.168.0.1 on the PC.
Step 2 Enter https://Monitoring local IP address (for example, https://192.168.0.10) in the address
box of the browser, and then press Enter to access the WebUI login page.
Issue 03 (2020-04-10)
Second-Level Third-Level
Menu Menu
Network IP Address
Parameters
Subnet Mask
Default
Gateway
Copyright © Huawei Technologies Co., Ltd.
9 Power-on and Commissioning
Default Setting Value
Value
192.168.0.1 Set this parameter according
0 to the address provided by
the network administrator.
255.255.255 Set this parameter according
.0 to the subnet mask provided
by the network
administrator.
192.168.0.1 Set this parameter according
to the gateway address
provided by the network
administrator.
NOTE
If the Wifi module is installed,
do not set the default gateway
to 192.168.0.1, preventing
conflict with the Wifi gateway.
81