Table of Contents
Advertisement
PowerCube 5000 (SUN2000-150KTL-S0)
Installation Guide
7.1 Installing a Dry Contact Signal Cable
If a dry contact signal cable is required, perform the following steps to install it.
Procedure
Step 1 Press the contact plate using a flat-head screwdriver to flip the metal spring inside a dry
contact.
Step 2 Connect a signal cable to the dry contact.
Step 3 Put away the screwdriver and check that the signal cable is securely connected to the dry
contact.
Figure 7-1 Installing a dry contact signal cable
(1) Contact plate
----End
Issue 03 (2020-04-10)
Copyright © Huawei Technologies Co., Ltd.
7
Installing Cables
(2) Dry contact
7 Installing Cables
48
Hide quick links:
Advertisement
Table of Contents
