PowerCube 5000 (SUN2000-150KTL-S0)
Installation Guide
Figure 3-14 Installing the waterproof panel
----End
3.3 Installing a Cabinet Ground Cable
Procedure
Step 1 Prepare a cable of suitable length and install an OT terminal on both ends of the cable.
Step 2 Route the ground cable and connect it to the ground bar.
Ensure that the ground cable is installed securely. If devices are not properly grounded,
damage to devices or personal injury may occur.
Issue 03 (2020-04-10)
Copyright © Huawei Technologies Co., Ltd.
3 Installing the Cabinet
31