I Hydraulic Connections - Zodiac PM40 Series Instructions For Installation And Use Manual

1.2 I Hydraulic connections

• The device will be connected with a Ø1.5" PVC pipe, using the connectors supplied (see § "5.1 I Description"), to the
pool's filtration circuit, after the filter and before the water treatment system.
• Respect the direction of hydraulic connection.
• A by-pass must be installed to make it easier to work on the appliance.
• To evacuate the condensates, fit an internal Ø18 pipe under the appliance base.
Location for connecting the condensate drainage line (appliance as seen from below)
Tip: condensate drainage
Caution, several litres of water can be drained from your appliance each day. We strongly recommend
connecting the drain to a suitable water drainage system.
12
: Water inlet valve
: By-pass valve
: Water outlet valve
: Water inlet adjustment valve
(optional)
: Water outlet adjustment valve
(optional)
: Water treatment system