Zodiac PM40 Series Instructions For Installation And Use Manual page 11

refrigerant. The cylinders must be equipped with a vacuum valve and a stop gate
in good working order. Empty collection cylinders are drained and, where possible,
cooled before recovery.
• The recovery equipment must be in good working order, the instructions for using
the equipment must be within reach and the equipment must be compatible for
use with the refrigerant concerned, including, where appropriate, a flammable
refrigerant. Moreover, a set of calibrated scales must be available and in good
working order. The pipework must be complete, have no leaks or disconnected
connectors, and must be in good condition. Before using the recovery unit, check
that it is in good working order, that it has been well maintained and that the
associated electric components are sealed so as to prevent any risk of fire in the event
of refrigerant being released. If you have any doubts, contact the manufacturer.
• The recovered refrigerant must be sent to the refrigerant supplier in its recovery
cylinder with a waste transfer note. Do not mix different refrigerants in the recovery
units, and in particular in the cylinders.
• If the compressor has been removed or if oil from the compressor has been drained,
check that the refrigerant has been completely removed to prevent it from mixing
with the lubricant. The draining process must be carried out before returning the
compressor to the supplier. Only the electric heater of the compressor body can
be used to accelerate this process. This operation can be carried out safely once all
liquids within the system have been drained.
RECYCLING
This symbol means that your appliance must not be thrown into a normal bin. It will be selectively collected
for the purpose of reuse, recycling or transformation. If it contains any substances that may be harmful to the
environment, these will be eliminated or neutralised. Contact your retailer for recycling information.
EN
9