Safety Warnings; Product Care - Barco R9841810 Installation Manual

1. SAFETY WARNINGS

1.1 Safety warnings during installation
Who may install
The installation must be performed by authorized technical personnel only.
Authorized technical personnel: persons having appropriate technical training and experience necessary to be aware of hazards to
which they are exposed in performing a task and of measures to minimize the danger to themselves or other persons.
Caution risk of electric shock
Before attempting to remove any of the projector's covers, the projector has to be turned off and disconnected from the wall outlet
to minimize the risk of electric shock.
Caution on head
Before starting with the Replacement of the Lamp Unit, always let cool down the projector after operation in order to reduce the heat
on parts in the light path and to avoid burns.
Warning eye damage
Eye damage may result from direct viewing the light produced by the lamp used in this equipment. Always turn off lamp before
opening cover.

1.2 Product care

Installation Kit
The Kit R9841810 - Lamp 2100W - is designed for use ONLY with the BARCO SLM 10 series projectors.
Replacement parts
When replacement parts are required, be sure the service technician has used original BARCO replacement parts or authorized
replacement parts which have the same characteristics as the BARCO original part.
Unauthorized substitutions may result in degraded performance and reliability, fire, electric shock or other hazards. Unauthorized
substitutions may void warranty.
Repairable
Under no circumstances are BARCO parts repairable by anyone other than BARCO.
R5976544 LAMP REPLACEMENT KIT 08012003
1. Safety Warnings
1