Table of Contents
Advertisement
4. INSERTING THE NEW LAMP
4.1 Installation of the new Lamp Unit.
What has to be done
First remove the lock nut on each spacer screw and next slide the lamp unit into the projector frame.
Necessary tools
Flatblade screwdriver of 5mm or Nut driver 8mm
Installing the lamp unit
1. Remove the lock nut on the 3 spacer screws (A). (image 4-1)
2. Line up the lamp unit guides with the guides on the projector frame (B) and push the unit into the frame until it fits. (image 4-2)
3. Secure the position of the lamp unit with the 3 spacer screws. (image 4-3)
Image 4-1
Lamp unit, removing the lock nuts
R5976544 LAMP REPLACEMENT KIT 08012003
4. Inserting the new lamp
7
Advertisement
Table of Contents
