Table of Contents
Advertisement
3. Removing the old lamp
3.2 Removing the Lamp Unit.
What has to be done
The lamp unit has to be slid out of the projector frame.
Necessary tools
Flatblade screwdriver of 5mm or Nutdriver of 8mm.
Sliding out the lamp unit
1. Loosen the 3 spacer screws (A). (image 3-3)
2. Using the provided handle (B), pull the lamp unit out of the projector frame. (image 3-4)
Caution:
Be careful not to drop the lamp unit (see safety instructions in front of instruction manual)
Image 3-3
Loosing the security locks
Image 3-4
Sliding out the lamp
6
R5976544 LAMP REPLACEMENT KIT 08012003
Advertisement
Table of Contents
