Back Cover - Sony Ericsson P910a Working Instruction, Mechanical

4.9

Back Cover

Tools:
•
•
•
NOTE!
•
Perform the steps of "Disassembly" section before proceeding.
1. Remove the camera gasket from its position in
the back cover using a pair of tweezers.
NOTE!
2. Remove the stylus by sliding it away from the
back cover as indicated.
3/00021-1/FEA 209 544/90 A

Sony Ericsson Mobile Communications AB
Torque screwdriver
JCIS No. 0 bit
Style 2A ESD-safe tweezers (Blunt Tip)
Whenever the phrase "pry tool" is used, a nylon pointer, an orange stick, or a front
opening tool may be used, depending on the user's preference.
The camera gasket some times sticks to
the circuit board when the circuit board
is removed so if the speaker gasket is
not present in the back cover locate it.
•
•
•
Step-by-Step Instructions
Working Instruction, Mechanical
Orange stick
Nylon pointer
Front opening tool
26(62)