Sony Ericsson P910a Working Instruction, Mechanical page 11

4. If a new display is being installed, mount the two
cushions shown onto the display as indicated.
5. If a new display is being installed, mount a
display spacer onto the edge of the display as
shown. If the old display is being reinstalled,
verify that a display spacer is mounted onto the
edge of the display as indicated. If a display
spacer is not present, install one as shown.
3/00021-1/FEA 209 544/90 A

Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Working Instruction, Mechanical
11(62)